Basic Setup for Froxlor Control Panel

how to handle it next when you’ve set up control that is floxor on your server? So here there are some tasks that are basic do after setting up Froxlor to help you make use of your host / vps to host your web sites and blog sites. As the things I stated in my own article that is previous VestaCP, Froxlor didn’t come with ready-to-use LAMP / LEMP stack but you have to install it manually but once you have Froxlor running on your server, you’ll have total control over your server without having to login to your server via comman line / SSH again. In terms of functionality and features, Froxlor is rather similar to Virtualmin than VestaCP.

So the first and the requirement that is only obviously you need to install Froxlor. Merely follow my guide that is previous:(

How to Install Froxlor on Debian or Ubuntu VPS

Next, simply follow steps below.

p.s: There are so many options available inside Froxlor CP indicating you can alter, setup and configure your server many ways you like via its web based user interface but of course you don’t have to alter all settings that are available. Therefore below i am going to just record extremely fundamental and necessary tasks need that is you’ll do to use Froxlor as a webhosting control panel.

Step 1 – open your web browser up and login to Froxlor admin dashboard web page. Login as admin

Fundamental Setup for Froxlor control interface 13

Admin Dashboard web page:

Fundamental Setup for Froxlor control interface 14

Step 2 – When logged in, visit Server >> Settings web page. Scroll listed below, allow Quota then click on the green Save switch.


Step 3 – get once again to Server >> Settings >> then Panel settings >> Settings. For the reason that web page you’ll find therefore options that are many can change its value and enable or disabled any settings. But here’s what I shall alter. You are able to merely follow me personally or perhaps you can aslo adjust couple of things all on your own:

  • Change Sender current email address
  • Change Panel e-mail transmitter name
  • Define answer Address (e-mail target as reply-to-address for mails delivered by the panel)
  • Define phpMyAdmin url
  • Define Webmail url
  • Define Webftp url

Here’s standard settings:


and right here’s my settings:


do keep in mind to click on the Save switch.

Step 4 – Now get once again to Server >> Settings >> then Account settings >> Settings. Once again, you can find therefore options that are many can change. Simply review that page and adjust stuff that is few feel it necessary, standard value works fine. As I will only enable “Allow password reset by Admin” option.( for me,******)


as usual, do not forget to click the green Save button.

Step 5 – Next, go to Server >> Settings >> then System settings >> Settings. Review that page again, each option is explanatory. To make it quick, I shall just allow the “Use domain title as standard value for DocumentRoot course” choice. For this reason i am going to have document that is well-structured path and make it easy to manage on the future.


Click the Save button after making changes.

Step 6 – Go back again to Server >> Settings page >> then now open the Nameserver Settings page. Do this only if you want to have your nameserver that is own). You are able to merely deactivate this particular feature if you utilize thirdparty DNS hosting like Cloudflare. Determine your own personal NS.


Hit the Save switch when done.

Step 7 – upcoming, make your hosting that is first account. In Froxlor it is named as Customer. So go to Resources >> Customers page >> click the Create customer link. As what you may see there, the Create Customer page has details that are many need to fill out nevertheless the necessary people are: Username, password, Name, very first Name, business, e-mail, Webspace quota, traffic quota, quantity of subdomains permitted, exactly how many email messages are permitted (addresses, records, forwarders), and exactly how numerous FTP records are permitted. See instance below:


Click the Save switch together with account are going to be added:


Step 8 – it is the right time to include a domain that is new and assign that domain to a user which in this example is the user created in step above. Now go to Resources >> Domains then click the Create Domain link. There few fields that are mandatory need to fill out: Domain, client, and Admin. Other areas are optional but take a moment adjust it towards need.


Click the Save that is green button always.

Thing to remember: the root web directory of your domain will be located at:

example of mine:

That’s it. You can now upload your website there.


About The Author

Traversing and walking the DOM with JavaScript

Previous article

An Introduction to Metrics, Monitoring, and Alerting

Next article

You may also like


Leave a Reply